Издательство Taylor&Francis по названию
Отображаемые элементы 204329-204348 из 558821
-
(Taylor & Francis Group, 1986-11-01)The factor of factional losses for both laminar and turbulent coolant flow through the passages in a gundrill has been investigated. A kidney shaped passage in the tip has been used because it is superior to both single ...
-
(Taylor & Francis Group, 1996-03-01)
-
(Taylor & Francis Group, 1993-07-01)Coenzyme F430 is a Ni(II)-containing corphinoid which was first isolated from the cells of methanogenic archaebacteria in 1978. The cofactor F430 is responsible for the conversion of CO2 into CH4 in the methanogenic process. ...
-
(Taylor & Francis Group, 1992-03-01)
-
(Taylor & Francis Group, 1991-01-01)We have studied the behaviour of the brain pentapeptide leucineenkephalin on phosphoric acid spiked glycerol matrices under FAB-PI conditions. Ion series of the general formula [mM+nH3PO4+H]+, [mM+H+62]+ and [mM+H3PO4+H+62]+ ...
-
(Taylor & Francis Group, 1986-07-01)Two peptides, H-Gly-Lys-Thr-Gly-Pro-Gly-OH (1) and Leu-enkephalin (2) FAB-PI spectra in normal and deuterated glycerol have been studied. Two C-deuterated and D2O exchanged analogs have been used to compare their fragmentation ...
-
(Taylor & Francis Group, 1977-06-15)The preferred orientations of the constituent minerals of a polycrystalline ore fabric can be determined by means of an X-ray pole-figure goniometer. Several complete pole figures for different crystallography planes permit ...
-
(Taylor & Francis Group, 1971-04-01)This article is a review of developments in the field of fabricated foods and covers the needs, definitions, advantages, disadvantages, and types of fabricated foods. Basic components of fabricated foods, especially new ...
-
(Taylor & Francis Group, 1990-02-01)Different thin film fabrication techniques of ferro- and piezoelectric materials is described with special emphasis on rf sputtering. The relative advantages and disadvantages of oxide and metallic targets, and the control ...
-
(Taylor & Francis Group, 1985-07-01)Fabrication techniques are investigated with a view to producing single phase perovskite lead indium niobate (PbIn1/2Nb1/2O3). The physical properties of ceramics produced using the various techniques are investigated. The ...
-
(Taylor & Francis Group, 1983-09-01)Glassy carbon discs have been coated with silicon in a chemical vapour deposition process to obtain leak-tight electrodes, sealed in glass. Electrodes with coatings thicker than 5μm prove to be leak-tight in contrast with ...
-
(Taylor & Francis Group, 1987-12-01)A method has been developed to decrease the room temperature resistance of a PTCR barium titanate ceramic by introducing internal electrodes in a configuration analogous to multilayer capacitors. A multilayer thermistor ...
-
(Taylor & Francis Group, 1994-02-01)Sol-gel method has been adopted to make copper-doped lead titanate (PT) films with perovskite structure by reacting liquid precursors to form sol. The films were deposited on stainless steel substrate by using multilayer ...
-
(Taylor & Francis Group, 1990-12-01)Integration of ferroelectrics in the current generation of electronic/photonic devices not only enhances the functional capabilities of these devices but also has potential for a variety of new applications. The fabrication ...
-
(Taylor & Francis Group, 1994-07-01)RF magnetron sputter deposited silicon nitride film was used as the gate dielectric material for the fabrication of metal-insulator-semiconductor field effect transistors. The fabrication process of an enhancement type ...
-
(Taylor & Francis Group, 1994-06-01)Optical and electrical changes in several kinds of organic films after ion implantation were investigated. Vacuum evaporated organic films were irradiated by 30–100 keV N+ ion beam. The ion dose was varied from 1014 to ...
-
(Taylor & Francis Group, 1995-04-01)The fabrication and characterization of planar, millimetre-wave diodes with in situ/ deposited epitaxial aluminium Schottky contacts is reported. A novel self-aligned technique developed to connect the in situ/ grown ...
-
(Taylor & Francis Group, 1994-10-01)Multilayer actuators with sixty 165-μm-layers (6.5 mm × 6.5 mm × 10 mm) of lead zirconate-titanate (PZT-4D) were made and tested to determine their possible use for low voltage electromechanical uses. These actuators were ...
-
(Taylor & Francis Group, 1995-11-01)Piezoelectric membranes consisting of PbZrxTi1−xO3 (PZT) films on silicon diaphragms have been fabricated, investigated, and applied for micromotors. The PZT films were deposited by sputtering and sol gel techniques. ...
-
(Taylor & Francis Group, 1991-09-01)Arrays of nearly impurity-free screw dislocations were produced in silicon with a new twist boundary fabrication technique. The electrical activity of these boundaries, studied with electron-beam induced current (EBIC), ...
Отображаемые элементы 204329-204348 из 558821