Издательство Taylor&Francis по журналам "Tribology Transactions"
Отображаемые элементы 1-20 из 2178
-
(Taylor & Francis Group, 2002-01-01)A major breakthrough development of a self-contained solid/powder lubricated auxiliary hydrodynamic bearing has recently been achieved successfully. This bearing was operated at speeds to 30,000 rpm, equivalent to three ...
-
(Taylor & Francis Group, 2012-01-01)The influence of 3D surface roughness on the transient non-Newtonian response of a dynamically loaded journal bearing under mixed lubrication is studied. A study of the transient non-Newtonian response of a dynamically ...
-
(Taylor & Francis Group, 2011-09-01)This article presents a theoretical model for dry, low-velocity, and wear-less friction based on a single asperity interaction with arbitrary assumed adhesion forces and elastic deformations of the microasperities. Simulations ...
-
(Taylor & Francis Group, 1992-01-01)The purpose of this paper is to present, analyze and optimize the geometry of the bi-directional radial groove film-riding gas seal (1). Performance is both hydrodynamic and hydrostatic and is independent of rotational ...
-
(Taylor & Francis Group, 1991-01-01)A gas bearing with a bi-directional hydrodynamic geometry is presented and analyzed. The configuration considered is an equally spaced set of alternating land and radial groove sectors, together forming a bearing surface. ...
-
(Taylor & Francis Group, 1994-01-01)In this paper, a new numerical algorithm is presented to predict gaseous cavitation in various fluid film bearings. Elrod's universal differential equation is transformed into a generalized boundary integral equation, which ...
-
(Taylor & Francis Group, 1994-01-01)The mechanics of the deformations and the destruction of the asperities of rough surfaces has been considered, taking into account the mutual influence of the elastic constants of the materials participating in the friction ...
-
(Taylor & Francis Group, 2001-01-01)This paper analytically investigates elastohydrodynamic lubrication (EHL) film load-carrying capacity in pure rolling for different surface speeds and different lubricant temperatures considering the lubricant viscoplasticity. ...
-
(Taylor & Francis Group, 1990-01-01)The influence of microstructure on room-temperature abrasive and erosive wear resistance of selected WC-Co materials was examined. Cermets containing 6 and 12 w/o Co were processed under controlled conditions to produce ...
-
(Taylor & Francis Group, 1995-01-01)A study was undertaken to obtain design data for possible damage scenarios for a planned deep-sea power cable between two Hawaiian islands. The combined results for abrasion and corrosion-erosion of cold drawn 0.85% C-steel ...
-
(Taylor & Francis Group, 1998-01-01)On the basis of ferrographic analysis, abrasive wear was found to dominate in the failure of some components in locomotive engines, particularly the cylinder bore and piston rings. Wear experiments were conducted to determine ...
-
(Taylor & Francis Group, 1995-01-01)This work investigates the abrasive wear performance, of thermally sprayed Cr3C2-25%NiCr coatings try APS with Ar/H2, APS with Ar/He and CDS detonation spray against AL2O3 and Si02-dominaled abrasive papers using a pin-on-disk ...
-
(Taylor & Francis Group, 1991-01-01)An experimental, investigation was conducted to examine the factional healing in a viscous lubricant film and also to investigate lubricant film thickness measurement. A hydrodynamic contact was achieved by loading a shoe ...
-
(Taylor & Francis Group, 1995-01-01)The friction and wear characteristics of various magnetic tapes mated with various tape path materials were studied in accelerated tests conducted on a reciprocating friction test apparatus. The tests were run in pure ...
-
(Taylor & Francis Group, 1996-01-01)This paper contains investigations of wear particles generated during the erosive wear of four different concrete, mixtures by high velocity water flow at velocities of about 700 m/s.i The wear particles were collected, ...
-
(Taylor & Francis Group, 1995-01-01)A solution technique is discussed which accelerates the convergence of the pivoted slider bearing problem. The technique is based on a fully populated, three-degrees-of-freedom stiffness matrix for the hydrodynamic lubricating ...
-
(Taylor & Francis Group, 1988-01-01)Few methods exist today for measuring the wear properties of magnetic-head ferrites and/or magnetic-tape particles other than by actual testing of a head or tape. The method described in this paper is basically a simple ...
-
(Taylor & Francis Group, 1990-01-01)Influence of pressure up to 52 MPa on thermal reaction of an extreme pressure additive with steel surface was investigated. Elementary sulfur dissolved in highly purified paraffinic mineral oil was used as a model lubricant, ...
-
(Taylor & Francis Group, 1990-01-01)The goal of many experimental studies of fluid film bearings is the determination of the eight linearized stiffness and damping coefficients. These coefficients cannot be measured directly; they are derived from a series ...
-
(Taylor & Francis Group, 1990-01-01)Six case studies are presented on the predicted uncertainties of derived bearing coefficients resulting from uncertainties in experimentally measured displacements, velocities, accelerations, and forces. In a previous paper ...
Отображаемые элементы 1-20 из 2178