Мобильная версия

Доступно журналов:

3 288

Доступно статей:

3 891 637

 

Скрыть метаданые

Автор J C Legras
Автор W Sabuga
Автор G F Molinar
Автор J W Schmidt
Дата выпуска 1999-12-01
dc.description As part of a wide-ranging key comparison organized by the Consultative Committee for Mass and Related Quantities (CCM) of the Comité International des Poids et Mesures, this report gives the results of a comparison of pressure measurements in the range 0.05 MPa to 1 MPa. The two transfer standards used were pressure balances equipped with large (10 cm<sup>2</sup>) effective area piston-cylinder assemblies. The scope of the comparison covered the observation of the behaviour of both piston and cylinder assemblies from two manufacturers and made from different materials. The results show agreement of all the laboratory standards within the estimated expanded uncertainties, expressed with a coverage factor k = 2. Most of the difference values (47 out of 54) are inside the standard uncertainties. These results demonstrate the coherency of the standards of the participating laboratories in the range 100 kPa to 1000 kPa for gas pressure, gauge mode.
Формат application.pdf
Издатель Institute of Physics Publishing
Название CCM key comparison in the pressure range 50 kPa to 1000 kPa (gas medium, gauge mode). Phase A2: Pressure measurements
Тип paper
DOI 10.1088/0026-1394/36/6/35
Electronic ISSN 1681-7575
Print ISSN 0026-1394
Журнал Metrologia
Том 36
Первая страница 663
Последняя страница 668
Аффилиация J C Legras; BNM-LNE, PTB, IMGC-CNR, NIST
Аффилиация W Sabuga; BNM-LNE, PTB, IMGC-CNR, NIST
Аффилиация G F Molinar; BNM-LNE, PTB, IMGC-CNR, NIST
Аффилиация J W Schmidt; BNM-LNE, PTB, IMGC-CNR, NIST
Выпуск 6

Скрыть метаданые