Мобильная версия

Доступно журналов:

3 288

Доступно статей:

3 891 637

 

Скрыть метаданые

Автор Kim, J K
Автор Park, J W
Автор Yang, H
Автор Choi, M
Автор Choi, J H
Автор Suh, K Y
Дата выпуска 2006-02-28
dc.description A simple, one-step method is developed to fabricate various nanostructures such as nanoholes and nanolines based on the detachment of an organic polymer film in contact with a patterned polyurethane acrylate mould under a low physical pressure (1–2 bar) at ambient conditions. Calculation of the work of adhesion based on contact angle measurements indicates that the adhesion strength at the organic/mould interface is greater than that at the organic/substrate interface, resulting in a successful detachment without any surface modifications. 4,4<sup>′</sup>-bis[N-1-napthyl-N-phenyl-amino]biphenyl (NPB) is used as the organic film owing to its low cohesion energy and stability in air. Nanoholes as small as 150 nm and nanolines as small as 50 nm have been fabricated using this approach. These nanostructures are used as a template for selective deposition of silver nanoparticles and a wet/dry etch resist for further pattern transfer.
Формат application.pdf
Издатель Institute of Physics Publishing
Копирайт IOP Publishing Ltd
Название Low-pressure detachment nanolithography
Тип paper
DOI 10.1088/0957-4484/17/4/017
Electronic ISSN 1361-6528
Print ISSN 0957-4484
Журнал Nanotechnology
Том 17
Первая страница 940
Последняя страница 946
Аффилиация Kim, J K; School of Mechanical and Aerospace Engineering, Seoul National University, Seoul 151-742, Korea
Аффилиация Park, J W; School of Mechanical and Aerospace Engineering, Seoul National University, Seoul 151-742, Korea
Аффилиация Yang, H; School of Mechanical and Aerospace Engineering, Seoul National University, Seoul 151-742, Korea
Аффилиация Choi, M; School of Mechanical and Aerospace Engineering, Seoul National University, Seoul 151-742, Korea
Аффилиация Choi, J H; School of Chemical and Biological Engineering, Seoul National University, Seoul 151-742, Korea
Аффилиация Suh, K Y; School of Mechanical and Aerospace Engineering, Seoul National University, Seoul 151-742, Korea ;
Выпуск 4

Скрыть метаданые