The Research of Screw Thread Parameter Measurement Based on Position Sensitive Detector and Laser
Q B Tong; Z L Ding; J C Chen; L L Ai; F Yuan; Q B Tong; Department of Automatic Testing and Control, Harbin Institute of Technology, Harbin 150001, China; Z L Ding; Department of Automatic Testing and Control, Harbin Institute of Technology, Harbin 150001, China; J C Chen; Department of Automatic Testing and Control, Harbin Institute of Technology, Harbin 150001, China; L L Ai; Department of Automatic Testing and Control, Harbin Institute of Technology, Harbin 150001, China; F Yuan; Department of Automatic Testing and Control, Harbin Institute of Technology, Harbin 150001, China
Журнал:
Journal of Physics: Conference Series
Дата:
2006-10-01
Аннотация:
A technique and system of measuring screw thread parameter based on the theory of laser measurement is presented in this paper, which can be carried out the automated measurement of screw thread parameter. An inspection instrument was designed and produced, which included exterior imaging system of optical path, transverse displacement measurement system, axial displacement measurement system, and a module to deal with, control and assess the data in the upper system. The inspection and estimate of the screw thread contour curve were completed by using position sensitive device (PSD) as photoelectric detector to measure the coordinate data of the screw thread contour curve in the transverse section, and using precise raster to measure the axial displacement of the precision worktable under the screw thread test criterion., computer can gives a measured result according to coordinate data of the screw thread obtained by PSD. The relation between measured spot and image is established, and optimum design of the system organization are introduced, including the image length of receiving lens focal length optical system and the choice of PSD , and some main factor affected measuring precision are analyzed. The experimental results show that the measurement uncertainty of screw thread minor diameter can reach 0. 5μm, which can meet most requests for the measurement of screw thread parameter.
115.0Кб