Издательство SAGE Publications по журналам "Journal of Building Physics"
Отображаемые элементы 1-20 из 65
-
(SAGE Publications, 1992-04-01)
-
(SAGE Publications, 1985-10-01)An unguarded, unidirectional heat flow technique is described for measuring the apparent thermal conductivity () of insulating materials in the range 300 to 330K. Vertical heat flow is generated by a 0.9 m by 1.5 m ...
-
(SAGE Publications, 1992-04-01)Use of sprayed-in foam insulation may improve the air tightness of frame wall systems. There are concerns: (1) whether construction moisture that is trapped in lumber framing will be able to dissipate sufficiently to prevent ...
-
(SAGE Publications, 1985-01-01)This paper describes the procedure, results, and error analysis from a study which characterizes a product lot of low-density, glass-fiber insulation material in terms of apparent thermal conductivity. The uncertainty of ...
-
(SAGE Publications, 1985-10-01)An unguarded longitudinal heat flow apparatus for measuring the apparent thermal conductivity () of insulations was tested with mean specimen temperatures from 300 to 330K on samples up to 0.91 m wide, 1.52 m long, and ...
-
(SAGE Publications, 1985-10-01)
-
(SAGE Publications, 1986-01-01)This note describes a test method for determination of air flow resistance of exterior membranes and sheathings. The test specimen is placed between two chambers with different air pressures and the volumetric air flow ...
-
(SAGE Publications, 1985-04-01)
-
(SAGE Publications, 1986-04-01)
-
(SAGE Publications, 1992-04-01)
-
(SAGE Publications, 1986-04-01)This report provides the information necessary to choose the appropriate apparatus size for a measurement of thermal resistance of a specimen of insulation material of a particular thickness. This information consists of ...
-
(SAGE Publications, 1992-04-01)
-
(SAGE Publications, 1984-10-01)This paper reports a measured relationship between the surface density of droplet condensation on a reflective aluminum surface and the emittance to infra-red radiation. The data can be used to predict the effect of ...
-
(SAGE Publications, 1992-04-01)The effect of polymer structure on both initial and aged thermal conductivity (K-factor) or thermal resistivity (R-value) was explored by using a new procedure to estimate the long-term thermal resistance of gas-filled ...
-
(SAGE Publications, 1992-04-01)The use of blowing agents as an alternative to conventional chloro-fluorocarbons (CFCs) and the quality of foaming process can lead to non-homogeneity of the foam structure with the presence of defects along the panel ...
-
(SAGE Publications, 1992-04-01)The effects of moisture gain by fibre glass insulation slabs were investigated experimentally by exposing one face of the slabs to a hot and humid ambient while maintaining the other face at a constant cold temperature. ...
-
(SAGE Publications, 1992-04-01)
-
(SAGE Publications, 1985-07-01)The outcome of the work presented here consists in predicting the moisture and heat transfer phenomena likely to occur in glass fiber insulants subjected to varying environmental conditions.This prediction is obtained by ...
-
(SAGE Publications, 1985-07-01)Ten lightweight sandwich panel systems with cores of cellular plastics have been subjected to a 10-minute furnace test modelled on AS 1530, Part 4 [1], and their behaviour studied in relation to fire performance requirements ...
-
(SAGE Publications, 1984-07-01)This paper is a synthesis of the various research projects studied by our research laboratory over the period 1974 to 1982 on the general topic of moisture.The various points covered by these projects, concerning exclusively ...
Отображаемые элементы 1-20 из 65